Latest update.

test/recipes/02-test_internal_provider.t

@@ -14,6 +14,6 @@ use OpenSSL::Test::Utils;
 setup("test_internal_provider");
 
 $ENV{OPENSSL_MODULES} = bldtop_dir("test");
-$ENV{OPENSSL_CONF} = bldtop_file("test", "provider_internal_test.conf");
+$ENV{OPENSSL_CONF} = bldtop_file("test", "provider_internal_test.cnf");
 
 simple_test("test_internal_provider", "provider_internal_test");

test/recipes/03-test_fipsinstall.t

@@ -30,7 +30,7 @@ my $infile = bldtop_file('providers', platform->dso('fips'));
 $ENV{OPENSSL_MODULES} = bldtop_dir("providers");
 
 # fail if no module name
-ok(!run(app(['openssl', 'fipsinstall', '-out', 'fips.conf', '-module',
+ok(!run(app(['openssl', 'fipsinstall', '-out', 'fips.cnf', '-module',
              '-provider_name', 'fips',
              '-macopt', 'digest:SHA256', '-macopt', 'hexkey:00',
              '-section_name', 'fips_install'])),
@@ -44,57 +44,57 @@ ok(!run(app(['openssl', 'fipsinstall', '-in', 'dummy.tmp', '-module', $infile,
    "fipsinstall verify fail");
 
 
-# output a fips.conf file containing mac data
-ok(run(app(['openssl', 'fipsinstall', '-out', 'fips.conf', '-module', $infile,
+# output a fips.cnf file containing mac data
+ok(run(app(['openssl', 'fipsinstall', '-out', 'fips.cnf', '-module', $infile,
             '-provider_name', 'fips', '-mac_name', 'HMAC',
             '-macopt', 'digest:SHA256', '-macopt', 'hexkey:00',
             '-section_name', 'fips_install'])),
    "fipsinstall");
 
-# verify the fips.conf file
-ok(run(app(['openssl', 'fipsinstall', '-in', 'fips.conf', '-module', $infile,
+# verify the fips.cnf file
+ok(run(app(['openssl', 'fipsinstall', '-in', 'fips.cnf', '-module', $infile,
             '-provider_name', 'fips', '-mac_name', 'HMAC',
             '-macopt', 'digest:SHA256', '-macopt', 'hexkey:00',
             '-section_name', 'fips_install', '-verify'])),
    "fipsinstall verify");
 
-# fail to verify the fips.conf file if a different key is used
-ok(!run(app(['openssl', 'fipsinstall', '-in', 'fips.conf', '-module', $infile,
+# fail to verify the fips.cnf file if a different key is used
+ok(!run(app(['openssl', 'fipsinstall', '-in', 'fips.cnf', '-module', $infile,
              '-provider_name', 'fips', '-mac_name', 'HMAC',
              '-macopt', 'digest:SHA256', '-macopt', 'hexkey:01',
              '-section_name', 'fips_install', '-verify'])),
    "fipsinstall verify fail bad key");
 
-# fail to verify the fips.conf file if a different mac digest is used
-ok(!run(app(['openssl', 'fipsinstall', '-in', 'fips.conf', '-module', $infile,
+# fail to verify the fips.cnf file if a different mac digest is used
+ok(!run(app(['openssl', 'fipsinstall', '-in', 'fips.cnf', '-module', $infile,
              '-provider_name', 'fips', '-mac_name', 'HMAC',
              '-macopt', 'digest:SHA512', '-macopt', 'hexkey:00',
              '-section_name', 'fips_install', '-verify'])),
    "fipsinstall verify fail incorrect digest");
 
 # corrupt the module hmac
-ok(!run(app(['openssl', 'fipsinstall', '-out', 'fips.conf', '-module', $infile,
+ok(!run(app(['openssl', 'fipsinstall', '-out', 'fips.cnf', '-module', $infile,
             '-provider_name', 'fips', '-mac_name', 'HMAC',
             '-macopt', 'digest:SHA256', '-macopt', 'hexkey:00',
             '-section_name', 'fips_install', '-corrupt_desc', 'HMAC'])),
    "fipsinstall fails when the module integrity is corrupted");
 
 # corrupt the first digest
-ok(!run(app(['openssl', 'fipsinstall', '-out', 'fips.conf', '-module', $infile,
+ok(!run(app(['openssl', 'fipsinstall', '-out', 'fips.cnf', '-module', $infile,
             '-provider_name', 'fips', '-mac_name', 'HMAC',
             '-macopt', 'digest:SHA256', '-macopt', 'hexkey:00',
             '-section_name', 'fips_install', '-corrupt_desc', 'SHA1'])),
    "fipsinstall fails when the digest result is corrupted");
 
 # corrupt another digest
-ok(!run(app(['openssl', 'fipsinstall', '-out', 'fips.conf', '-module', $infile,
+ok(!run(app(['openssl', 'fipsinstall', '-out', 'fips.cnf', '-module', $infile,
             '-provider_name', 'fips', '-mac_name', 'HMAC',
             '-macopt', 'digest:SHA256', '-macopt', 'hexkey:00',
             '-section_name', 'fips_install', '-corrupt_desc', 'SHA3'])),
    "fipsinstall fails when the digest result is corrupted");
 
 # corrupt DRBG
-ok(!run(app(['openssl', 'fipsinstall', '-out', 'fips.conf', '-module', $infile,
+ok(!run(app(['openssl', 'fipsinstall', '-out', 'fips.cnf', '-module', $infile,
             '-provider_name', 'fips', '-mac_name', 'HMAC',
             '-macopt', 'digest:SHA256', '-macopt', 'hexkey:00',
             '-section_name', 'fips_install', '-corrupt_desc', 'CTR'])),

test/recipes/04-test_conf.t

@@ -16,8 +16,8 @@ use File::Compare qw(compare_text);
 setup('test_conf');
 
 my %input_result = (
-    'dollarid_on.conf'  => 'dollarid_on.txt',
-    'dollarid_off.conf' => 'dollarid_off.txt',
+    'dollarid_on.cnf'  => 'dollarid_on.txt',
+    'dollarid_off.cnf' => 'dollarid_off.txt',
 );
 
 plan skip_all => 'This is unsupported for cross compiled configurations'

test/recipes/25-test_req.t

@@ -15,7 +15,7 @@ use OpenSSL::Test qw/:DEFAULT srctop_file/;
 
 setup("test_req");
 
-plan tests => 15;
+plan tests => 16;
 
 require_ok(srctop_file('test','recipes','tconversion.pl'));
 
@@ -42,6 +42,34 @@ ok(!run(app([@addext_args, "-addext", $val, "-addext", $val2])));
 ok(!run(app([@addext_args, "-addext", $val, "-addext", $val3])));
 ok(!run(app([@addext_args, "-addext", $val2, "-addext", $val3])));
 
+subtest "generating alt certificate requests with RSA" => sub {
+    plan tests => 3;
+
+    SKIP: {
+        skip "RSA is not supported by this OpenSSL build", 2
+            if disabled("rsa");
+
+        ok(run(app(["openssl", "req",
+                    "-config", srctop_file("test", "test.cnf"),
+                    "-section", "altreq",
+                    "-new", "-out", "testreq-rsa.pem", "-utf8",
+                    "-key", srctop_file("test", "testrsa.pem")])),
+           "Generating request");
+
+        ok(run(app(["openssl", "req",
+                    "-config", srctop_file("test", "test.cnf"),
+                    "-verify", "-in", "testreq-rsa.pem", "-noout"])),
+           "Verifying signature on request");
+
+        ok(run(app(["openssl", "req",
+                    "-config", srctop_file("test", "test.cnf"),
+                    "-section", "altreq",
+                    "-verify", "-in", "testreq-rsa.pem", "-noout"])),
+           "Verifying signature on request");
+    }
+};
+
+
 subtest "generating certificate requests with RSA" => sub {
     plan tests => 2;
 

test/recipes/30-test_evp.t

@@ -84,7 +84,7 @@ unless ($no_fips) {
     $ENV{OPENSSL_CONF_INCLUDE} = bldtop_dir("providers");
 
     ok(run(app(['openssl', 'fipsinstall',
-                '-out', bldtop_file('providers', 'fipsinstall.conf'),
+                '-out', bldtop_file('providers', 'fipsinstall.cnf'),
                 '-module', $infile,
                 '-provider_name', 'fips', '-mac_name', 'HMAC',
                 '-macopt', 'digest:SHA256', '-macopt', 'hexkey:00',

test/recipes/30-test_evp_fetch_prov.t

@@ -48,7 +48,7 @@ my @testdata = (
 unless ($no_fips) {
     push @setups, {
         cmd     => app(['openssl', 'fipsinstall',
-                        '-out', bldtop_file('providers', 'fipsinstall.conf'),
+                        '-out', bldtop_file('providers', 'fipsinstall.cnf'),
                         '-module', bldtop_file('providers', platform->dso('fips')),
                         '-provider_name', 'fips', '-mac_name', 'HMAC',
                         '-macopt', 'digest:SHA256', '-macopt', 'hexkey:00',

test/recipes/30-test_evp_pkey_provided.t

@@ -1,6 +1,5 @@
 #! /usr/bin/env perl
-# Copyright 2018 The OpenSSL Project Authors. All Rights Reserved.
-# Copyright (c) 2018, Oracle and/or its affiliates.  All rights reserved.
+# Copyright 2020 The OpenSSL Project Authors. All Rights Reserved.
 #
 # Licensed under the Apache License 2.0 (the "License").  You may not use
 # this file except in compliance with the License.  You can obtain a copy

test/recipes/30-test_evp_pkey_provided/EC.priv.pem

@@ -0,0 +1,5 @@
+-----BEGIN PRIVATE KEY-----
+MIGHAgEAMBMGByqGSM49AgEGCCqGSM49AwEHBG0wawIBAQQgM9BDg6mJVgPS1/5r
+AW/kWcwNmiRshhsu3EtNNUPhG62hRANCAAQbk2dVHFWfY9EipNjRCmBtAqV3V8ij
+R3M6aggoOb3J0oDs6acIKXEvyVaC7pqFD21/WV+M0ZYL3yk+SQeIP5op
+-----END PRIVATE KEY-----

test/recipes/30-test_evp_pkey_provided/EC.priv.txt

@@ -0,0 +1,13 @@
+Private-Key: (256 bit)
+priv:
+    33:d0:43:83:a9:89:56:03:d2:d7:fe:6b:01:6f:e4:
+    59:cc:0d:9a:24:6c:86:1b:2e:dc:4b:4d:35:43:e1:
+    1b:ad
+pub:
+    04:1b:93:67:55:1c:55:9f:63:d1:22:a4:d8:d1:0a:
+    60:6d:02:a5:77:57:c8:a3:47:73:3a:6a:08:28:39:
+    bd:c9:d2:80:ec:e9:a7:08:29:71:2f:c9:56:82:ee:
+    9a:85:0f:6d:7f:59:5f:8c:d1:96:0b:df:29:3e:49:
+    07:88:3f:9a:29
+ASN1 OID: prime256v1
+NIST CURVE: P-256

test/recipes/30-test_evp_pkey_provided/EC.pub.pem

@@ -0,0 +1,4 @@
+-----BEGIN PUBLIC KEY-----
+MFkwEwYHKoZIzj0CAQYIKoZIzj0DAQcDQgAEG5NnVRxVn2PRIqTY0QpgbQKld1fI
+o0dzOmoIKDm9ydKA7OmnCClxL8lWgu6ahQ9tf1lfjNGWC98pPkkHiD+aKQ==
+-----END PUBLIC KEY-----

test/recipes/30-test_evp_pkey_provided/EC.pub.txt

@@ -0,0 +1,9 @@
+Public-Key: (256 bit)
+pub:
+    04:1b:93:67:55:1c:55:9f:63:d1:22:a4:d8:d1:0a:
+    60:6d:02:a5:77:57:c8:a3:47:73:3a:6a:08:28:39:
+    bd:c9:d2:80:ec:e9:a7:08:29:71:2f:c9:56:82:ee:
+    9a:85:0f:6d:7f:59:5f:8c:d1:96:0b:df:29:3e:49:
+    07:88:3f:9a:29
+ASN1 OID: prime256v1
+NIST CURVE: P-256

test/recipes/70-test_comp.t

@@ -28,7 +28,7 @@ plan skip_all => "$test_name needs TLSv1.3 or TLSv1.2 enabled"
     if disabled("tls1_3") && disabled("tls1_2");
 
 $ENV{OPENSSL_ia32cap} = '~0x200000200000000';
-$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
+$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.cnf");
 
 use constant {
     MULTIPLE_COMPRESSIONS => 0,

test/recipes/70-test_sslmessages.t

@@ -30,7 +30,7 @@ plan skip_all => "$test_name needs TLS enabled"
        || (!disabled("tls1_3") && disabled("tls1_2"));
 
 $ENV{OPENSSL_ia32cap} = '~0x200000200000000';
-$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
+$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.cnf");
 
 my $proxy = TLSProxy::Proxy->new(
     undef,

test/recipes/70-test_sslversions.t

@@ -49,7 +49,7 @@ my $proxy = TLSProxy::Proxy->new(
 );
 
 #We're just testing various negative and unusual scenarios here. ssltest with
-#02-protocol-version.conf should check all the various combinations of normal
+#02-protocol-version.cnf should check all the various combinations of normal
 #version neg
 
 #Test 1: An empty supported_versions extension should not succeed

test/recipes/70-test_tls13kexmodes.t

@@ -32,7 +32,7 @@ plan skip_all => "$test_name needs EC enabled"
     if disabled("ec");
 
 $ENV{OPENSSL_ia32cap} = '~0x200000200000000';
-$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
+$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.cnf");
 
 
 @handmessages = (

test/recipes/70-test_tls13messages.t

@@ -32,7 +32,7 @@ plan skip_all => "$test_name needs EC enabled"
     if disabled("ec");
 
 $ENV{OPENSSL_ia32cap} = '~0x200000200000000';
-$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
+$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.cnf");
 
 
 @handmessages = (

test/recipes/70-test_tls13psk.t

@@ -28,7 +28,7 @@ plan skip_all => "$test_name needs TLSv1.3 enabled"
     if disabled("tls1_3");
 
 $ENV{OPENSSL_ia32cap} = '~0x200000200000000';
-$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
+$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.cnf");
 
 my $proxy = TLSProxy::Proxy->new(
     undef,

test/recipes/80-test_ct.t

@@ -11,7 +11,7 @@ use OpenSSL::Test qw/:DEFAULT srctop_file srctop_dir/;
 use OpenSSL::Test::Simple;
 
 setup("test_ct");
-$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
+$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.cnf");
 $ENV{CT_DIR} = srctop_dir("test", "ct");
 $ENV{CERTS_DIR} = srctop_dir("test", "certs");
 simple_test("test_ct", "ct_test", "ct", "ec");

test/recipes/80-test_ssl_new.t

@@ -19,9 +19,9 @@ use OpenSSL::Test::Utils qw/disabled alldisabled available_protocols/;
 setup("test_ssl_new");
 
 $ENV{TEST_CERTS_DIR} = srctop_dir("test", "certs");
-$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
+$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.cnf");
 
-my @conf_srcs =  glob(srctop_file("test", "ssl-tests", "*.conf.in"));
+my @conf_srcs =  glob(srctop_file("test", "ssl-tests", "*.cnf.in"));
 map { s/;.*// } @conf_srcs if $^O eq "VMS";
 my @conf_files = map { basename($_, ".in") } @conf_srcs;
 map { s/\^// } @conf_files if $^O eq "VMS";
@@ -54,56 +54,56 @@ my $no_ocsp = disabled("ocsp");
 # Add your test here if the test conf.in generates test cases and/or
 # expectations dynamically based on the OpenSSL compile-time config.
 my %conf_dependent_tests = (
-  "02-protocol-version.conf" => !$is_default_tls,
-  "04-client_auth.conf" => !$is_default_tls || !$is_default_dtls
+  "02-protocol-version.cnf" => !$is_default_tls,
+  "04-client_auth.cnf" => !$is_default_tls || !$is_default_dtls
                            || !disabled("sctp"),
-  "05-sni.conf" => disabled("tls1_1"),
-  "07-dtls-protocol-version.conf" => !$is_default_dtls || !disabled("sctp"),
-  "10-resumption.conf" => !$is_default_tls || $no_ec,
-  "11-dtls_resumption.conf" => !$is_default_dtls || !disabled("sctp"),
-  "16-dtls-certstatus.conf" => !$is_default_dtls || !disabled("sctp"),
-  "17-renegotiate.conf" => disabled("tls1_2"),
-  "18-dtls-renegotiate.conf" => disabled("dtls1_2") || !disabled("sctp"),
-  "19-mac-then-encrypt.conf" => !$is_default_tls,
-  "20-cert-select.conf" => !$is_default_tls || $no_dh || $no_dsa,
-  "22-compression.conf" => !$is_default_tls,
-  "25-cipher.conf" => disabled("poly1305") || disabled("chacha"),
-  "27-ticket-appdata.conf" => !$is_default_tls,
-  "28-seclevel.conf" => disabled("tls1_2") || $no_ec,
-  "30-extended-master-secret.conf" => disabled("tls1_2"),
+  "05-sni.cnf" => disabled("tls1_1"),
+  "07-dtls-protocol-version.cnf" => !$is_default_dtls || !disabled("sctp"),
+  "10-resumption.cnf" => !$is_default_tls || $no_ec,
+  "11-dtls_resumption.cnf" => !$is_default_dtls || !disabled("sctp"),
+  "16-dtls-certstatus.cnf" => !$is_default_dtls || !disabled("sctp"),
+  "17-renegotiate.cnf" => disabled("tls1_2"),
+  "18-dtls-renegotiate.cnf" => disabled("dtls1_2") || !disabled("sctp"),
+  "19-mac-then-encrypt.cnf" => !$is_default_tls,
+  "20-cert-select.cnf" => !$is_default_tls || $no_dh || $no_dsa,
+  "22-compression.cnf" => !$is_default_tls,
+  "25-cipher.cnf" => disabled("poly1305") || disabled("chacha"),
+  "27-ticket-appdata.cnf" => !$is_default_tls,
+  "28-seclevel.cnf" => disabled("tls1_2") || $no_ec,
+  "30-extended-master-secret.cnf" => disabled("tls1_2"),
 );
 
 # Add your test here if it should be skipped for some compile-time
 # configurations. Default is $no_tls but some tests have different skip
 # conditions.
 my %skip = (
-  "06-sni-ticket.conf" => $no_tls_below1_3,
-  "07-dtls-protocol-version.conf" => $no_dtls,
-  "08-npn.conf" => (disabled("tls1") && disabled("tls1_1")
+  "06-sni-ticket.cnf" => $no_tls_below1_3,
+  "07-dtls-protocol-version.cnf" => $no_dtls,
+  "08-npn.cnf" => (disabled("tls1") && disabled("tls1_1")
                     && disabled("tls1_2")) || $no_npn,
-  "10-resumption.conf" => disabled("tls1_1") || disabled("tls1_2"),
-  "11-dtls_resumption.conf" => disabled("dtls1") || disabled("dtls1_2"),
-  "12-ct.conf" => $no_tls || $no_ct || $no_ec,
+  "10-resumption.cnf" => disabled("tls1_1") || disabled("tls1_2"),
+  "11-dtls_resumption.cnf" => disabled("dtls1") || disabled("dtls1_2"),
+  "12-ct.cnf" => $no_tls || $no_ct || $no_ec,
   # We could run some of these tests without TLS 1.2 if we had a per-test
   # disable instruction but that's a bizarre configuration not worth
   # special-casing for.
   # TODO(TLS 1.3): We should review this once we have TLS 1.3.
-  "13-fragmentation.conf" => disabled("tls1_2"),
-  "14-curves.conf" => disabled("tls1_2") || $no_ec || $no_ec2m,
-  "15-certstatus.conf" => $no_tls || $no_ocsp,
-  "16-dtls-certstatus.conf" => $no_dtls || $no_ocsp,
-  "17-renegotiate.conf" => $no_tls_below1_3,
-  "18-dtls-renegotiate.conf" => $no_dtls,
-  "19-mac-then-encrypt.conf" => $no_pre_tls1_3,
-  "20-cert-select.conf" => disabled("tls1_2") || $no_ec,
-  "21-key-update.conf" => disabled("tls1_3"),
-  "22-compression.conf" => disabled("zlib") || $no_tls,
-  "23-srp.conf" => (disabled("tls1") && disabled ("tls1_1")
+  "13-fragmentation.cnf" => disabled("tls1_2"),
+  "14-curves.cnf" => disabled("tls1_2") || $no_ec || $no_ec2m,
+  "15-certstatus.cnf" => $no_tls || $no_ocsp,
+  "16-dtls-certstatus.cnf" => $no_dtls || $no_ocsp,
+  "17-renegotiate.cnf" => $no_tls_below1_3,
+  "18-dtls-renegotiate.cnf" => $no_dtls,
+  "19-mac-then-encrypt.cnf" => $no_pre_tls1_3,
+  "20-cert-select.cnf" => disabled("tls1_2") || $no_ec,
+  "21-key-update.cnf" => disabled("tls1_3"),
+  "22-compression.cnf" => disabled("zlib") || $no_tls,
+  "23-srp.cnf" => (disabled("tls1") && disabled ("tls1_1")
                     && disabled("tls1_2")) || disabled("srp"),
-  "24-padding.conf" => disabled("tls1_3"),
-  "25-cipher.conf" => disabled("ec") || disabled("tls1_2"),
-  "26-tls13_client_auth.conf" => disabled("tls1_3"),
-  "29-dtls-sctp-label-bug.conf" => disabled("sctp") || disabled("sock"),
+  "24-padding.cnf" => disabled("tls1_3"),
+  "25-cipher.cnf" => disabled("ec") || disabled("tls1_2"),
+  "26-tls13_client_auth.cnf" => disabled("tls1_3"),
+  "29-dtls-sctp-label-bug.cnf" => disabled("sctp") || disabled("sock"),
 );
 
 foreach my $conf (@conf_files) {
@@ -133,7 +133,7 @@ sub test_conf {
            "Getting output from generate_ssl_tests.pl.");
 
     SKIP: {
-        # Test 2. Compare against existing output in test/ssl_tests.conf.
+        # Test 2. Compare against existing output in test/ssl_tests.cnf.
         skip "Skipping generated source test for $conf", 1
           if !$check_source;
 

test/recipes/80-test_ssl_old.t

@@ -18,7 +18,7 @@ use OpenSSL::Test::Utils;
 
 setup("test_ssl");
 
-$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
+$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.cnf");
 
 my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_psk,
     $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2, $no_tls1_3,

test/recipes/80-test_ssl_test_ctx.t

@@ -15,5 +15,5 @@ use OpenSSL::Test qw/:DEFAULT srctop_file/;
 setup("test_ssl_test_ctx");
 
 plan tests => 1;
-ok(run(test(["ssl_test_ctx_test", srctop_file("test", "ssl_test_ctx_test.conf")])),
-   "running ssl_test_ctx_test ssl_test_ctx_test.conf");
+ok(run(test(["ssl_test_ctx_test", srctop_file("test", "ssl_test_ctx_test.cnf")])),
+   "running ssl_test_ctx_test ssl_test_ctx_test.cnf");

test/recipes/90-test_gost.t

@@ -31,7 +31,7 @@ plan skip_all => "No test GOST engine found"
 plan tests => 1;
 
 $ENV{OPENSSL_CONF} = srctop_file("test", "recipes", "90-test_gost_data",
-                                 "gost.conf");
+                                 "gost.cnf");
 
 ok(run(test(["gosttest",
              srctop_file("test", "recipes", "90-test_gost_data",

test/recipes/90-test_includes_data/vms-includes.cnf

@@ -2,4 +2,4 @@
 # Example configuration file using includes.
 #
 
-.include [.conf-includes]
+.include [.cnf-includes]